Step 1: After the business and customers have confirmed the production drawings of the stainless steel jewelry display cabinet, the drawings are issued and the production begins.
Step 2: The display cabinet structural designer will expand the drawings according to the construction drawings and send out the required stainless steel plates for grooving and bending. At the same time, confirm the purchase of the required hardware accessories, lamps and leather. The grooving and bending time is generally 2 to 3 days.
Step 3: After the stainless steel plates are bent and grooved, the welders and grinders of the hardware department are assigned to work, and the welders will weld the display cabinet structure frame. The welding will first fix the structure with electric welding, and then burn welding for full welding.
Step 4: After the welder frame is welded, the grinder will grind, polish and brush the weld points.
Step 5: If there is a display cabinet that needs a logo while the fourth step is in progress, the LOGO will be sent out for chemical corrosion or laser engraving at this time.
The above five steps are what we need to do in the first part. Weld the entire frame into shape. During the whole process, we need to consider the stability of the frame structure and the polishing of the corners. After welding and forming, we measure the size to purchase glass and customize props.
Many consumers do not know how the color of stainless steel is made. Some think it is colored stainless steel, and some think it is baking paint. In fact, both methods are not feasible. The most direct problem of the first type of colored stainless steel is that it needs to be polished after welding. During the polishing process, if it is colored stainless steel, the color of the polishing position will all fall off. In addition, another disadvantage of colored stainless steel is that most of them are not treated with anti-oxidation and anti-fingerprint. So this method is absolutely not feasible. The second type of baking paint, baking paint is mostly used on wood, and can also be used on iron. Because the adhesion of iron and stainless steel is different, the adhesion of stainless steel is relatively small. If stainless steel is baked, the paint surface will fall off layer by layer over time. So the second method is also not feasible.
In fact, after the second part of the frame is completed, our next process is stainless steel electroplating. The electroplating is based on the existing stainless steel color plate. In the production process, the stains on the stainless steel surface are cleaned first, then high-temperature baking is performed, and then the adjusted oil color is soaked on the stainless steel surface and then high-temperature baking is performed. After baking, the surface is treated with anti-oxidation and anti-fingerprint treatment in the oil room.
The last step is the installation of the stainless steel jewelry display cabinet, including the installation of lamps, glass, leather and locks. After installation, foreign customers pack and ship in wooden boxes.
